The Beat-Sonic ENA-2T1 is a plug-and-play amplifier kit that dramatically improves the sound quality of your factory Toyota, Scion, or Subaru stereo - no cutting, no harness modifications, and no need to replace your head unit or speakers. More clarity. More bass. More detail. All from a single compact unit that installs in under two hours.
Professional local installation available in La Mirada, Southern California. Contact us at info@beatsonicusa.com to book.
Why your factory stereo sounds underwhelming - and how the ENA-2T1 fixes it
Toyota, Scion, and Subaru factory head units are built to a cost. The amplifier stage inside your OEM radio or external amplifier is one of the first areas where manufacturers cut corners, resulting in a flat, compressed sound even through otherwise decent factory speakers. The ENA-2T1 solves this by strengthening and optimizing the audio signal before it reaches your factory amplifier - giving it a cleaner, more powerful signal to work with, and allowing your factory system to perform closer to its true potential across all frequency ranges.
Your factory head unit, steering wheel controls, and speakers all stay in place and continue to work exactly as before. You simply get the sound your system was always capable of - finally unlocked.
Key features
- Plug-and-play installation - no special tools, no harness modifications, no cutting
- 45W x 4-channel output - significantly more power than factory head unit amplification
- High-quality FET op-amp input stage - reproduces fine musical detail including voice tone and breath at high resolution
- Ultra-compact design - flexible installation location, fits easily behind the dash
- High-level speaker input - additional RCA high-level input for even higher quality signal connection for an external media player
- Premium acoustic components - low-impedance capacitors and 70μ extra copper thickness for improved frequency response across low, mid, and high ranges
- Retains factory head unit - your display, controls, and all factory features continue to work normally
- Compatible with aftermarket speakers - keep impedance at 4Ω-8Ω when using aftermarket speakers
- Made in Japan
Specifications
- Maximum output: 45W x 4ch (4Ω)
- Compatible impedance: 4-8Ω
- Input sensitivity: 0.5-5V
- Frequency response: 15-80kHz (+0, -1dB)
- Total harmonic distortion: 0.01% (1kHz / 4Ω)
- Power supply: DC12V (minus ground), DC11V-15V range
- Current consumption: 0.2A (no signal)
- Fuse: 15A
- Audio input: AUX level (RCA) + speaker level (high-level input)
- Dimensions: 96mm (W) x 40mm (D) x 113.5mm (H)
- Weight: 420g
Compatible vehicles
The ENA-2T1 is compatible with the following Toyota, Scion, Subaru, and Lexus models:
- 2013-2016 Scion FR-S
- 2013-2021 Subaru BRZ
- 2013-2020 Subaru Forester
- 2015-2023 Subaru Impreza
- 2015-2017 Subaru Legacy
- 2015-2019 Subaru Outback
- 2013-2021 Subaru WRX
- 2017-2020 Toyota 86
- 2014-2019 Toyota 4Runner
- 2015-2018 Toyota Avalon
- 2014-2017 Toyota Camry
- 2014-2019 Toyota Corolla
- 2014-2019 Toyota Highlander
- 2015-2019 Toyota Prius
- 2015-2019 Toyota Prius c
- 2016-2017 Toyota Prius v
- 2013-2018 Toyota RAV4
- 2014-2019 Toyota Sequoia
- 2015-2017 Toyota Sienna
- 2014-2019 Toyota Tacoma
- 2014-2019 Toyota Tundra
- 2004-2023 Toyota Yaris
- All other 1987-2019 Toyota and Scion models with 10/6-pin radio connectors
- 2016-2018 Lexus ES 300h / ES 350 without factory navigation (requires extension cable)
- 2016-2023 Lexus GX 460 without factory navigation
- 2014-2020 Lexus IS 200t / IS 250 / IS 300 / IS 350 without factory navigation (requires extension cable)
- 2015-2017 Lexus NX 200t / NX 300 without factory navigation (requires extension cable)
- 2015-2017 Lexus RC 200t / RC 300 / RC 350 without factory navigation (requires extension cable)
- 2016-2021 Lexus RX 350 / RX 450h without factory navigation (requires extension cable)
Note: Select Lexus models require an extension cable for installation - see individual model notes above. Not sure if this fits your specific trim? Email info@beatsonicusa.com with your year, model, trim, and audio system before purchasing.
Installation
No special tools required. No modifications to the factory wiring harness. Most owners complete the install in under two hours using our step-by-step YouTube video guides. Professional installation is available in Southern California through Beat-Sonic directly, or through our authorized installer network worldwide. Email info@beatsonicusa.com with your location or zip code to find the nearest shop.
Frequently asked questions
Will I need to replace my factory speakers or head unit?
No. The ENA-2T1 works with your existing factory head unit and speakers. You keep everything in place - the amp simply adds power and clarity to what you already have.
Is this compatible with aftermarket head units?
The ENA-2T1 works with aftermarket head units as long as the factory head unit retains the factory connectors that our ENA-2T1 plug and play harness connects to.
Is this compatible with JBL or Harman Kardon factory systems?
Compatibility varies by model. If you are unsure whether your vehicle has JBL or Harman Kardon, email info@beatsonicusa.com with your year, model, and trim before purchasing. If using new aftermarket speakers, keep the impedance at 4Ω for non-JBL models.
Some Lexus models say they require an extension cable - is that included?
The extension cable is included if you selected the appropriate Lexus vehicle on the drop down menu. The models that require it are noted in the compatibility list above. Email info@beatsonicusa.com if you have questions about your specific vehicle.
Can I use aftermarket speakers with this amp?
Yes. If using new aftermarket speakers, keep the impedance at 4Ω-8Ω.
Will my steering wheel controls still work?
Yes. All factory features including steering wheel controls and your factory display continue to work normally.
What is the RMS output vs. peak output?
The 45W x 4ch rating is peak output. RMS is the continuous power output your amp delivers - peak is during short bursts. This is standard across the amplifier industry.
How long does installation take?
Most installs take about 2 hours following our YouTube video guide. Professional installation is available in Southern California or through our authorized installer network worldwide.
Does this ship to Canada or internationally?
Yes. We ship to Canada and Mexico.
