Skip to content
en
United States USD
Skip to product information

Front Runner Slimline II Rack for 5th Gen Toyota 4Runner

Regular price $1,799.00

Front RunnerPart # KRTF054T

Slimline II Roof Rack Kit specs and details

A full-size Slimline II platform with the 5th Gen 4Runner foot rails and a wind deflector, all in one kit. It mounts at the eight factory roof-rail points, and you pick whether the front rails get drilled or go on with the included no-drill kit.

5th Gen 4Runner with Slimline II rack and rooftop tent in dusty conditions
Slimline II carrying a rooftop tent on a 5th Gen 4Runner
  • Fits2010-2024 Toyota 4Runner (5th Gen)
  • Tray size85.3 x 49.4 in
  • Installed weightAbout 91 lb
  • MaterialBlack powder-coated T6 aluminum, high-strength steel
  • Mounting8 factory roof-rail points
  • Front railsDrill or no-drill, both included

Why it stands out

  • Slimline II 5th Gen 4Runner rack, angled studio view of the tray
    Full-size platformAt 85.3 x 49.4 in, this is Front Runner's full-size tray, with room for several accessories at once.
  • Close-up of the Slimline II rack mounted on a 5th Gen 4Runner roof
    Uses the factory mounting pointsThe 4Runner-specific foot rails bolt to the eight existing factory mounting points.
  • Drill or no-drill front railsBoth front rail options come in the box: drill for a permanent install, or use the no-drill kit if the rack may come off later.
  • Hand installing a fitting into a Slimline II slat T-slot
    T-slots top and bottomThe slats and edge profiles take standard M8 bolts above and below the tray, so accessories mount where you need them.
  • Room for a table underneathOpenings in the foot rails let you slide in one Front Runner under-rack table, either the smaller prep size or the larger camp size.

Up close

  • Slimline II rack on a 5th Gen 4Runner, rear three-quarter view
  • Front Runner Slimline II rack for 5th Gen 4Runner, isolated studio view
  • 5th Gen 4Runner with Slimline II rack and awning on a dirt trail
Specifications
Part numberKRTF054T
Fits2010-2024 Toyota 4Runner (5th Gen)
Tray size85.3 x 49.4 in
Installed weightAbout 91 lb
MaterialBlack powder-coated T6 aluminum, high-strength steel
Mounting8 factory roof-rail points
Front railsDrill or no-drill, both included
Tray height2 in (tray only, foot rails add more)
Accessory mountingT-slots on top and bottom of slats and edges, standard M8 bolts
Under-rack storageFoot rail openings fit 1 Front Runner under-rack table
Fitment
VehicleYears
Toyota 4Runner (5th Gen)2010-2024
  • The factory roof rails come off, and the foot rails take their place.
  • Not for the 2025 and newer 4Runner, which is a new generation.

Not sure it fits your build? Message us with your year and trim before you order.

What's in the box
  • Slimline II tray, 85.3 x 49.4 in (RRSTD11)
  • Wind deflector
  • 5th Gen 4Runner foot rails (FATF006)
  • No-drill installation kit for the front rails (RRAC961)
  • Mounting hardware and installation instructions
Installation
Hands2 recommended, to lift the tray onto the roof
DrillingOnly if you want to. The kit includes both options for the front foot rails: drill for a permanent mount, or use the included no-drill kit, which sits on spacers with double-sided tape in the roof channel. The no-drill route means trimming a short section of the roof channel molding.

Tools

  • Metric sockets and hex keys (sizes listed in the instructions)
  • Denatured alcohol for the no-drill spacers

Before you start

  • Remove the factory roof rails first.
  • Read the foot rail and no-drill instructions before you start, and check the fit before you trim any molding.

Instructions: Foot rail guide (FATF006) · No-drill kit guide (RRAC961)

Returns
  • Returns: Returns are accepted within 30 days. Defective or problem items return free; change-of-mind returns carry a 20% restocking fee. Refund policy.

Slimline II Roof Rack Kit FAQ

Will the Slimline II Roof Rack Kit fit my 4Runner?

It's made for the 2010-2024 Toyota 4Runner (5th Gen). The factory roof rails come off, and the foot rails take their place. Not for the 2025 and newer 4Runner, which is a new generation. If you're not sure about your trim or setup, message us before you order.

What comes in the box?

Slimline II tray, 85.3 x 49.4 in (RRSTD11); Wind deflector; 5th Gen 4Runner foot rails (FATF006); No-drill installation kit for the front rails (RRAC961); Mounting hardware and installation instructions.

Do I need to drill?

Only if you want to. The kit includes both options for the front foot rails: drill for a permanent mount, or use the included no-drill kit, which sits on spacers with double-sided tape in the roof channel. The no-drill route means trimming a short section of the roof channel molding.

Can I mount gear under the tray?

Yes. The T-slots run on the bottom of the slats and edge profiles too, and the foot rails have an opening for one Front Runner under-rack table.

What if I need to return it?

Returns are accepted within 30 days. Defective or problem items return free; change-of-mind returns carry a 20% restocking fee. Refund policy.

About the brand

Front Runner

Front Runner began in South Africa building racks for overland travel, and its racks are still made there. Today Dometic sells the line as the Dometic Front Runner Series.

Shop all Front Runner →
Front Runner Slimline II roof rack on a 5th Gen Toyota 4Runner, front three-quarter studio view
Front Runner Slimline II Rack for 5th Gen Toyota 4RunnerFront Runner Slimline II Rack for 5th Gen Toyota 4Runner

Small Brands

We love to list and support small enthusiast-run businesses

Fast Shipping

On Most Items

Best Price Guarantee

We price match

Build Advice

Free build consultation

Drawer Title
Similar Products