Redline Parlux Triple Row LED Tailgate Light Bar for Tacoma with Rever

Redline Parlux Triple Row LED Tailgate Light Bar for Tacoma with Reverse Light, Brake Light & Sequential Turn Signals

$127.19

$269.99$142.80 OFF

Select size/turn signal color

48" Amber 48" Amber
48" Red 48" Red

Select prime warranty

No. Thank You. No. Thank You.
Yes. Protect Me.(See Below for Details) Yes. Protect Me.(See Below for Details)

Quantity

Description



3X More Stopping Power Than The Standard Redline. The Ultimate In Tailgate Lighting: Command attention with every signal. Bombard those behind you with a volley of 840 powerful LED's (48" model). Three complete rows of lights dedicated to maximizing your pickup's presence with an attractive and unique beam of light. Exclusive "1-2-3" Sequential Turn Signals. While other tailgate turn signals are just a standard "blink", the Triple Stack gives your truck a distinctive and sporty look with "1-2-3" Sequential amber or red turn signals. The same style used by a certain American-made muscle car and only offered by Redline. Tinted Windows Making It Hard To See Behind You? Our extra bright reverse lights will help illuminate the area behind your ride when reversing. Have a backup camera? Say goodbye to grainy videos and see a much clearer picture at night! Go Ahead, Take It To The Lake. A lot of folks claim to be waterproof, but Redline actually is. Using a rust-resistant aluminum body and an IP67 waterproof silicone, Redline is protected end to end from any sand, dirt, dust, snow, or water. Can Handle a Minnesota Winter. It's not always sunny in Minnesota, but that's OK! Redline is a built to last even at negative 20 Fahrenheit! The best part...no drilling required! Made to be as a simple and strong as possible. Simply peel, prep, press onto your pickup and this add-on is as good as factory installed. Comes with a tough-as-nails adhesive enhancer that increases hold strength over 5x. No need to drill, it ain't goin' anywhere. The Tacoma Triple Tailgate Has 2 Installation Methods: 1) Connect to the 4-PIN: by plugging into the 4-pin plug directly and hardwire the reverse wire. 2) Plug-n-Play into the 7-PIN: for 2005-2023 Tacoma, search OPT7 Harness with Reverse or Click Here. Plug 'N' Play Ready Plugs directly into your 4-way flat trailer adapter for a quick install. (Reverse light will require additional wiring, instructions provided if needed). If you have a 7-way round trailer adapter you will need to get the 7 to 4 Pin Adapter (CLIKE HERE). Planning on doing some towing? Purchase our Y-Splitter (CLICK HERE) and power both your tailgate light bar and the lights on your trailer at the same time. Spare Tire Access Port Accessibility The compatibility of the Redline Parlux Tacoma LED is determined by the amount of flat surface available on the tailgate. If your Tacoma has 48 inches of flat space along the tailgate, then the 48-inch version will be a perfect fit. Redline Tacoma Parlux is a dual option created for Toyota Tacoma 2nd / 3rd Generations with obstacles in the center of the bumper. This light bar is the perfect for Tacoma's and other vehicles with a center mounted tire. Mounting: 4 ways to mount Parlux LED Light Bar Using Plastic Aligner + EVA Foam (included) Position at desire location mount using adhesive back-end tape (included) Using mounting brackets & screws (included) Using tailgate light bar magnets (Click Here) Redline Triple Light Bar Coordination: Top Row: Turn Signal/ Hazards Middle Row: Reverse Lights Bottom Row: Brake/ Running Lights Specifications: LED Count: 840 LEDs on 48-inch Dimensions: 48-inch (L24" x W0.8" x H0.2") Wattage: 3W Voltage: DC 12V Amperage: 0.25 amp Turn Signal Style: “Sequential” Waterproof Rating: IP67 Material: Rust-Resistant Aluminum. LED Type: Advanced Bright LED Feature Set: Running \| Brake \| "1-2-3" Sequential Turn Signals \| Reverse \| Sequential Hazards Exclusive Reverse Light Launch Sequence Safety Feature: when you shift into reverse, the light will first flash the extreme white light three times for safety, then the reverse white light will stay on continuously. Mounting: Automotive Adhesive with reinforced applicator Working Temp: -20°F to 170°F Plug’n’Play: 4-Pin Trailer Adapter with Backup wiring Compatible with: 2005-2023 Toyota Tacoma Not Compatible with: 2022+ Chevrolet Silverado/GMC Sierra, 2022+ Ford Maverick Warranty: 1 Year Add Prime Warranty to Upgrade Standard to Prime for $15.00 Install Guide: Redline Triple Tailgate Light Bar for Tacoma Installation Guide - Click Here What function does each color pin serve on the Redline Triple Tailgate Bar with Hard Wire Harnesss? - Click Here What function does each color serve on the Redline Triple LED Tailgate Bar for Hard-wiring? - Click Here CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

3X More Stopping Power Than The Standard Redline.
The Ultimate In Tailgate Lighting: Command attention with every signal. Bombard those behind you with a volley of 840 powerful LED's (48" model). Three complete rows of lights dedicated to maximizing your pickup's presence with an attractive and unique beam of light.

Exclusive "1-2-3" Sequential Turn Signals.
While other tailgate turn signals are just a standard "blink", the Triple Stack gives your truck a distinctive and sporty look with "1-2-3" Sequential amber or red turn signals. The same style used by a certain American-made muscle car and only offered by Redline.

Tinted Windows Making It Hard To See Behind You?
Our extra bright reverse lights will help illuminate the area behind your ride when reversing. Have a backup camera? Say goodbye to grainy videos and see a much clearer picture at night!

Go Ahead, Take It To The Lake.
A lot of folks claim to be waterproof, but Redline actually is. Using a rust-resistant aluminum body and an IP67 waterproof silicone, Redline is protected end to end from any sand, dirt, dust, snow, or water.

Can Handle a Minnesota Winter.
It's not always sunny in Minnesota, but that's OK! Redline is a built to last even at negative 20 Fahrenheit!

The best part...no drilling required!
Made to be as a simple and strong as possible. Simply peel, prep, press onto your pickup and this add-on is as good as factory installed. Comes with a tough-as-nails adhesive enhancer that increases hold strength over 5x. No need to drill, it ain't goin' anywhere.

The Tacoma Triple Tailgate Has 2 Installation Methods:

1) Connect to the 4-PIN: by plugging into the 4-pin plug directly and hardwire the reverse wire.
2) Plug-n-Play into the 7-PIN: for 2005-2023 Tacoma, search OPT7 Harness with Reverse or Click Here.

Plug 'N' Play Ready
Plugs directly into your 4-way flat trailer adapter for a quick install. (Reverse light will require additional wiring, instructions provided if needed). If you have a 7-way round trailer adapter you will need to get the 7 to 4 Pin Adapter (CLIKE HERE). Planning on doing some towing? Purchase our Y-Splitter (CLICK HERE) and power both your tailgate light bar and the lights on your trailer at the same time.

Spare Tire Access Port Accessibility
The compatibility of the Redline Parlux Tacoma LED is determined by the amount of flat surface available on the tailgate. If your Tacoma has 48 inches of flat space along the tailgate, then the 48-inch version will be a perfect fit.
Redline Tacoma Parlux is a dual option created for Toyota Tacoma 2nd / 3rd Generations with obstacles in the center of the bumper. This light bar is the perfect for Tacoma's and other vehicles with a center mounted tire.

Mounting:
4 ways to mount Parlux LED Light Bar

Using Plastic Aligner + EVA Foam (included)
Position at desire location mount using adhesive back-end tape (included)
Using mounting brackets & screws (included)
Using tailgate light bar magnets (Click Here)

Redline Triple Light Bar Coordination:

Top Row: Turn Signal/ Hazards
Middle Row: Reverse Lights
Bottom Row: Brake/ Running Lights

Specifications:

LED Count: 840 LEDs on 48-inch
Dimensions: 48-inch (L24" x W0.8" x H0.2")
Wattage: 3W
Voltage: DC 12V
Amperage: 0.25 amp
Turn Signal Style: “Sequential”
Waterproof Rating: IP67
Material: Rust-Resistant Aluminum.
LED Type: Advanced Bright LED
Feature Set: Running | Brake | "1-2-3" Sequential Turn Signals | Reverse | Sequential Hazards
Exclusive Reverse Light Launch Sequence Safety Feature: when you shift into reverse, the light will first flash the extreme white light three times for safety, then the reverse white light will stay on continuously.
Mounting: Automotive Adhesive with reinforced applicator
Working Temp: -20°F to 170°F
Plug’n’Play: 4-Pin Trailer Adapter with Backup wiring
Compatible with: 2005-2023 Toyota Tacoma
Not Compatible with: 2022+ Chevrolet Silverado/GMC Sierra, 2022+ Ford Maverick
Warranty: 1 Year